Default password for your Cisco E2000 router is admin. This works in most of all cases, except for a few. Other Linksys does not require username but Linksys E2000 does. Default IP Address to access router is 192.168.1.1.

But there are cases when fault password doesn’t work. What to do then?

We recommend you not to set very complex passwords which are to remember and difficult to guess.

Benefit of E2000 router is that in case you forget your password by using factory defaults you can get back to your default username and password and can start all over again. Password will be set to admin again.

Following are step by step details to do this –

1. Assure that your Cisco wireless router is plugged in and power is on.
2. To see the network cable and power cable turn around the router to where these are plugged in.
3. Check for the rest area- it is just a small hole back there with small button inside.
4. You have to press down this button for 5 seconds. Use something that small and sharp at tip like paperclips or so.
5. Wait for around 30 seconds for router to finish its resetting after leaving the button.
6. Unplug the router for some time and then reattach the plug.
7. Wait for router to finish booting up. It usually takes only 30 seconds.
8. Now your router is reset to its own default username and password. You need to login the default logging username i.e. 192.168.1.1. And admin as your default password.
9. Remember it’s important at this to change your default password from admin to something more secure. There are application like free password manager, store your new password in them so that you don’t forget them or have to worry about it later.

Recollect all the reconfiguration that you have as custom setting before you rebooted your Cisco Linksys E2000 router, you’ll have to add them now. In case you had wireless network, you will have reconfigure your SSID and password; port forwarding settings, DNS server setting, etc.

Once your custom setting are done, it’s advised to back up the configuration of the router this will save your efforts to renter this all information in case these situations happen again.

Linksys E2000 Advanced Wireless-N Router User Guide

In case you can’t access your Cisco Linksys E2000, what should be done?

Many people mostly keep their default IP Address same as in Linksys Wi-Fi router. In case you have changed it, you won’t require to change it or rest it back to 192.168.1.1. All you need is to do is find a default gateway of any computer that is now connected to your router. There are many guides available to find your default gateway IP address.

The post What to Do When Default Password of Cisco Linksys E2000 doesn’t Work? User Guide appeared first on Cisco User Guide.

Here we provide you guide with full instructions for login in Linksys E1000 as follows –

IP Address

Information of the internal IP Address is necessary before login can be done to router e.g.- 192.168.1.1

In case you don’t have your IP Address of your Cisco E1000 router, these two ways can help to you to know your IP Address –

1. Follow a guide which explains how to find IP Address to your router
2. Or software called Router IP Address can be used. It is available free.

After having IP Address of your router, you can proceed with login.

Linksys E1000 Wireless-N Router User Guide

Login

Web interface for configuration is integrated in Cisco Linksys E1000. By use of any web browser login to the router can be done. Here in this article, we are explaining login process by using internet explorer.

1. Insert Linksys router internal IP Address –

Web browser will show address bar. You have to enter your Internal IP Address and press enter. A dialog box will pop up asking for your username and password on the screen.

2. Default username and password to Linksys Wi-Fi router –

You must know your router’ username and password in order to login. We have provided default username and password for the Cisco Linksys E1000 in the table below:

Now enter your username and password in dialog box that had appeared before.

3. Home screen of E1000 router –

After successful login, home screen of internet router will appear on the screen.

Linksys E1000 Wireless-N Router Datasheet

Solutions to Problems Faced During Login

There are instance in which your login cannot be successful, we have mentioned solutions to some general problem that you can face –

• Password of Cisco Linksys E1000 is not working –

You will need another password. In such cases the default password is different than most others. A list of other default passwords should be tried.

• Can’t remember your password?

Contact your internet provider. If they have set it for you they will provide it to you and problem is solved. In case they haven’t, you can ask them to rest your Linksys E1000 username and password for you.

• How to go back to the default setting of your Cisco E1000 –

Even after trying all the mentioned solution you cannot login, you will need to set your router of its default settings. Various guides are available that can help in resetting the default username and password of your Linksys Wi-Fi router.

The post How to Login to Your Cisco Linksys E1000 Router? User Guide and Spec appeared first on Cisco User Guide.